Description
A Bias Tee allows DC power to be diplexer with an RF signal and fed up a coaxial feed line to a device that can accept power via coaxial input. In the satellite communication industry a Bias Tee is typically used to power a Block Up Converter (BUC). A critical element of a Bias Tees design is to ensure that DC power is sent in a specific direction to protect the modem or modulator connected in the reverse direction of where the DC power is being drawn.
A Bias Tee is a simple and economical method of providing power to a BUC because it can be installed indoors and the DC power fed over the length of the coaxial cable to the BUC. Our X1601 Bias Tee can pass up to 6 amps of current allowing most BUCs under 20 Watts to be powered. Our X1601 Bias Tee allows a DC input connection via standard banana sockets with F type female RF connections available.
- Bandwidth 950MHz to 2GHz
- Reference & IF Supplied from Modem
- Up to 6 Amps DC Input
- 15-60 VDC Power Input
- “N” or “F” RF Interface Options
- DC port-Red, Ground port-Black
- 3 Year Product warranty
| Item | Specification | |
|---|---|---|
| RF Frequency | 950MHz 0- 2GHz | |
| Voltage | 15 – 60V DC | |
| Current | 6 Amps. max. | |
| Insert Loss | ||
| 10MHz | 1.0dB max. | |
| 950MHz – 1.7GHz | 1.0dB max. | |
| DC Interface | Banana Jack | |
| RF Interface | ||
| X1601 – F | From Modem and to VSAT: F Type | |
| X1601 – N | From Modem and to VSAT: N Type | |
| Impendence | ||
| F Type | 75 Ohms | |
| N Type | 50 Ohms | |
| Operating Temperature Range | -40ºC to +50ºC | |
| Dimensions (without connector) | 53.1×43.55×21.3 mm | |
| Weight | 150g max. |
NJRC
NJRC
Av-Comm
NJRC